Monday, October 24, 2011

How to make my inside case (system) temperatarue cooler ?

i just bough new CPU fan so my CPU temp is perfect now.but

i still have pro with my system temp.any one know what to do ?

i have 3 diff fan.in my case 1 (8*8) in back flow the air out. 2 is (12*12) again flow the air out in my case door and last one is (8*8) in my case door that flow in because that's in front of my CPU that make change for air.my power have 1 fan out like all and one inside of case.now what should i do ?i still haveVeryy hot temp coming out of my system and my system temp is near 65c sometimes

what should i do ? idon'tt have any room for usingwater coolingg any pic any websites about this any experience ?How to make my inside case (system) temperatarue cooler ?Do you have a standard sized case or a small (mini, Micro or Slimline) case.

In the small cases airflow is interrupted by the cabling and you can often just tidy this up and move it away from either the fans or the exhaust vents.

In a standard size case you need to consider the through flow of air. You already have 3 external fans, so it must be the through flow that is the problem. You say that fan 3 is in front of the CPU and the flow is inward, turn it around and draw the air out.

The fan closest to the CPU should always draw air out. Why? because the CPU fan is drawing cooler air in through the bottom of the heatsink and pumping it out hotter into the case from the CPU fan, you need to take this hot air and draw it straight out of the case not blow it in.

Try to get the air to circulate, cool air in at the bottom, hot air out at the top. Remember that your PSU also generates a lot of heat and does have its own fan, this will also draw the heat out at the back of the PC so include this as one of the extraction fans when trying to set up the circulation effect.How to make my inside case (system) temperatarue cooler ?Make sure fan air flow it going the right way though the case.

front case fans blow air in,rear extracts air,plus (your cpu fan)have you got large enough heat spreader %26amp; fan.the ideal for air flow is 1/3 more in than out. How to make my inside case (system) temperatarue cooler ?Sounds like you have sufficent airflow in regards to fans. Along with having clean fans to provide airflow you also need to make sure the heatsink is clean. I clean mine every 3 or 4 months considering my PC is on all the time. It's easy and takes 5 minutes to do. Get a can of air from a local retailer. Turn the PC off and release the heatsink clips. In some case it might be screwed in. Once it is out take it outside and blow it clean with the can of air. You should be able to see through it. On the bottom of the heatsink you will find some heat resistant paste. Do not wipe this off and if there is not much on there then pick some up at any electronics retailer. When you have the heatsink all cleaned then just pop it back in and see if your temp drops.



If the heatsink cleaning doesn't cool it down then you need to find the source of the heat. For instance, some hard drives run very hot. Seagate's seem to be pron to creating heat. Especially the Barracuda's. In that case you might consider adding a second hard drive which doesn't run so hot. Samsung and Western Digital are good brands.